Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across San Bernardino
Gate Installation in San Bernardino typically runs separately from repair, which costs $189 to $540 for common fixes like opener replacement, keypad swaps, and sensor realignment. Most repairs are completed in one visit, with a written price before any work begins. If you’re on the north side near Cal State or down along Del Rosa, you know the kind of gates we see: 1960s wrought iron that’s been through a thousand hot summers and every Santa Ana blow that’s rolled off the foothills.
We answer calls at (341) 895-4331 around the clock, and a live person picks up, not a queue.
Why Latch and Post Gate Repair Riverside Is San Bernardino’s Trusted Electric Gate Repair Team
Since 2009, Latch & Post has been part of the Cedarwell family of independently owned and operated gate specialists. Our Electric Gate Repair crews work on exactly one thing: gates. Not fences on the side, not general contracting. Latches, posts, motors, and the electronics that run them.
We’re factory-trained on the brands families in San Bernardino actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when a 1974 custom swing gate in Del Rosa shows up with hinge placement nobody has made in fifty years. Our technicians have seen it. They carry what’s needed, and when they don’t, they fabricate on site.
Every visit includes the Cedarwell Care Promise: a written price before the first tool comes out, shoe covers and drop cloths indoors, and a photo of the cleanup before we leave. No upsells. No surprise line items. And the 365-Day Done Right Promise stays behind after we go: if the repair isn’t right, we make it right.
Styles & brands we work with
Commercial Gate Operator in San Bernardino
Commercial gate operator work in San Bernardino runs $1,200 to $4,800 depending on duty cycle, gate weight, and whether underground or above-ground mounting makes sense for the site. This is not a job for a general handyman. A heavy slide gate on a warehouse off Mill Street that cycles forty times a day needs a properly sized operator, correct force settings, and entrapment protection that actually passes inspection. That’s the work we do.
Heavy-Duty Operators and Duty Cycle
San Bernardino’s industrial corridors along the 215 and around the airport have gate traffic that eats residential-grade operators in about a year. We size match the operator to the gate’s daily cycle count, then set force and speed to the gate’s actual weight, not a guess. A 900-pound steel slide gate gets a different unit than a 300-pound tubular steel swing gate, and we never cut corners by undersizing to hit a lower quote.
Safety Edges, Loops, and Code
Commercial operators in San Bernardino need monitored entrapment protection, and local inspectors check it. We install and test photo eyes, reversing edges, and loop detectors to current standards, and we document the test results. If your current setup has a bypassed safety edge or a dead loop, we’ll tell you plainly what it costs to correct it and why it cannot stay that way.
Gate Opener Repair in San Bernardino
Gate opener repair in San Bernardino typically runs $220 to $480 for the most common failures we see: stripped rack and pinion drives, failed control boards, and misaligned limit switches. The San Bernardino climate beats these openers up differently than coastal air does. Heat expansion and wind-driven grit grinding into the gear teeth shortens the life of every moving part.
Control Board Diagnosis
When an opener stops responding, most companies swap the board and hope. We chase the root cause first: a shorted harness, a failing transformer, a safety sensor dropping voltage, or a board that actually did cook. Every diagnosis is a written finding, and we explain what failed, why it failed, and what the fix costs, before any part gets ordered.
Rack and Pinion Drives Along the Foothills
Santa Ana winds have a particular way of stressing slide gates in the foothill neighborhoods around Cajon and Verdemont. Gusts shove the gate leaf sideways, and the rack teeth take the full force of the correction. We’ve pulled metal shavings out of drive trays on gates that hadn’t even reached their second winter. When we set a new rack, we pin it through the leaf and set mesh clearance to factory spec, not to whatever “looks close enough.”
Safety note: A gate opener under spring tension or a heavy gate leaf mid-cycle can injure or kill. If your gate is stuck open, stuck shut, or making a grinding noise, don’t try to force it. Call a trained technician. The forces involved are not something to test by hand.
Trusted Brands We Service in San Bernardino
We keep common parts for Ghost Controls, Mighty Mule, and DoorKing on the vans that run to San Bernardino, which means fewer return trips. When a Ghost Controls opener on a Verdemont driveway gate loses its limit settings, we can usually replace the board the same visit. When a Mighty Mule on a Del Rosa swing gate has a dead arm actuator, we carry the retrofit kit. San Bernardino Doorking service is something we provide regularly - operators are common on the larger estate gates off North Park Boulevard and in the foothills, and we’ve rebuilt enough of them to know which generations fail and which ones just need a relay. Parts we don’t stock will be ordered with an honest lead time, not a vague “soon.”
Common Electric Gate Repair Problems We See in San Bernardino Homes
- Warped wrought iron frames on 1950s – 80s gates. Decades of high-desert sun and Santa Ana wind has pulled many of these frames out of square. The gate still works mechanically, but the panel flexes enough to throw off the photo eye or bind the hinge line, and realignment plus welding is the only true fix.
- Seized hinges on mid-century custom gates. In Del Rosa and the Highland area, we repeatedly see 1960s-era custom gates with non-standard hinge placements. The hinge pin gets heat-seized into place, and the gate drags low on the latch side. We cut, replace, and re-align to get the leaf moving freely again.
- Stripped rack teeth from wind stress. Slide gates along the foothill corridors take Santa Ana gusts that twist the leaf and strip the rack and pinion teeth. The opener motor runs, but the gate doesn’t move, or it jerks and grinds in place.
- Rust at the post footing after heavy rain. San Bernardino doesn’t get much rain, but when it comes, it settles at the base of older tubular steel posts. Rust eats the post from the inside out, the gate sags, and the driveway edge catches it. We cut out the damaged section, sleeve it, and reset the post to plumb.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in San Bernardino, CA
Here are the ranges San Bernardino homeowners tell us they’re seeing, and what we quote:
| Repair | Typical Range in San Bernardino |
|---|---|
| Keypad replacement or reprogram | $120 – $240 |
| Remote control replacement or pairing | $45 – $110 |
| Safety sensor (photo eye) realignment or replacement | $150 – $320 |
| Control board replacement | $280 – $520 |
| Gate motor replacement (residential swing) | $480 – $920 |
| Commercial gate operator installation | $1,200 – $4,800 |
| Hinge post realignment with welding | $350 – $750 |
Those are honest ranges, not a low teaser number that grows later. The written quote you receive before any work starts is the exact number you pay. Every estimate is free, and you’re under no obligation to accept it. Call (341) 895-4331 and a live person will schedule the visit.
We Also Serve Cities Near San Bernardino
Our Electric Gate Repair in San Bernardino crews also run to Highland, Rialto, Colton, and Redlands. If you’re just outside the city line, call and ask; we’ll tell you straight whether it’s a service address we can reach this week.
Serving San Bernardino, CA - Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Bernardino
Because the 1950s-80s wrought iron gates on the north and west sides of San Bernardino were built with hinge placements that have shifted as the post metal fatigued from decades of sun and wind. Adjusting the panel levels the latch but leaves the hinge pulling out of plumb, so the gate sags again in months. Realignment cuts the hinge free, re-plumbs the post, and welds it back true. In Del Rosa we repaired a 1963 custom swing gate where the hinge post had pulled 2 inches out of plumb; we re-welded the non-standard hinge placement, installed a new LiftMaster operator, and recalibrated the loop detector so the heavy ornamental gate cycles silently. Call (341) 895-4331 for an assessment; estimates are free.
Yes, we can fabricate replacement pickets, scrollwork, and hinge brackets to match the existing gate’s profile, and we do this regularly on San Bernardino’s mid-century ornamental gates. The operator gets sized to the gate’s actual weight after the metalwork is done, not before, because patch welding and added reinforcement change the load. We’ll quote the metalwork and the operator separately in writing, so you see exactly what each part costs before you approve anything. Call (341) 895-4331 to get an estimate.
Santa Ana winds shorten the life of gate hardware by loading the leaf sideways, stressing rack teeth, hinge pins, and operator gears more than normal use ever would. Foothill-area gates take the worst of it, and we see stripped teeth and worn drive gears after two or three windy seasons. A properly set operator with correct torque limits and a well-anchored rack survives the same winds with far less damage. If your gate sounded louder this past wind season, call (341) 895-4331 and we’ll inspect the drive train before something strips entirely.
Yes, current California code requires monitored entrapment protection on all automatic gates, which means photo eyes, reversing edges, or both that actively monitor the gate’s closing path. Older San Bernardino gates often have a simple non-monitored edge or a dead loop from the original install, and that will not pass today’s inspection. We test what you have, explain the gap in plain terms, and quote the correction, which usually runs $180 to $420 for retrofitted monitored edges on a typical residential swing gate. Call (341) 895-4331 and we’ll check yours.
Yes, we work on underground operators, typically on the larger estate properties in the foothills and along North Park Boulevard. Underground units fail differently than above-ground ones, usually from water intrusion at the case, worn spindle bearings, or a failed hydraulic line. We diagnose the case, extract the operator, and rebuild or replace it with the gate itself braced safely so the property remains secure during the work. A rebuild typically runs $900 to $2,200, and a full replacement runs $2,800 to $6,500 depending on the gate’s weight. Call (341) 895-4331 for a written estimate before the ground is ever opened.
Call Latch and Post for Electric Gate Repair in San Bernardino
We’ll talk you through what’s happening with your gate, give you a straight price, and show up when we say we will. Shoe covers on, drop cloths down, quiet tools if the kids are asleep. You’ll see the cleanup photo before we leave. You’ll get the 365-Day Done Right Promise in writing, and if anything isn’t right, we come back and fix it, no argument.
Call (341) 895-4331 now for a free estimate. A live person answers, day or night.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Riverside, serving San Bernardino since 2009.