Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rialto, CA
Rialto gates live a harder life than most. The city’s mix of 1950s-through-1980s tract homes with original ornamental iron gates, plus the warehouse district along the I-10 and 210 where cantilever gates cycle dozens of times a day, means the repairs we do here rarely match a textbook fix. Dry heat bakes the powder coating off. Santa Ana winds push grit into rollers. Rain events shift posts. We work on all of it, from a sagging driveway gate in a 1960s ranch neighborhood to a vertical pivot gate at a truck yard. Call (341) 895-4331 and a live person answers, day or night.
Why Rialto Homes Are Different
Most of Rialto’s residential streets north of the 210 were built between the 1950s and 1980s, and a lot of those homes still carry their original gates. Wrought-iron driveway gates with hardware that has outlived its useful life, chain-link side gates where the latch no longer meets the post, stucco-and-tile ranches with decorative gate styles that need custom-fabricated hinges rather than off-the-shelf parts. In the older neighborhoods, original builders often used non-standard post spacing, so a replacement hinge or operator often has to be made to fit rather than picked off a shelf.
The climate adds another layer. Rialto summers are hot and dry, which means unprotected steel rusts faster than you would expect once the coating cracks. Santa Ana events drive fine dust into rolling mechanisms until they bind. And when the heavy rains do come, soil around gate posts can shift enough to pull the gate out of alignment within days. We see misaligned posts and seized rollers more in Rialto than in most nearby cities, and we plan repairs around those specific failure points rather than treating every gate as though it lived in a mild coastal ZIP code.
Styles & brands we work with
Our Main Rialto Services
Most calls we take in Rialto come down to two things: a gate that no longer lines up with its post, or a motor that stopped answering the remote. Each of our three services has its own Rialto page where you can read about costs, timing, and the brands we fix.
Gate Repair in Rialto
A Rialto gate repair usually starts with a sag. The post has shifted in sandy or clay-heavy soil, or the original hinges from the 1970s have worn through. We measure the alignment, check the post, and replace what actually failed rather than greasing a hinge that will sag again next month. In older north Rialto neighborhoods, non-standard post spacing often calls for a custom hinge or bracket fabrication. Every repair gets a written price before we touch anything. Read the full breakdown on our Gate Repair in Rialto page.
Gate Installation in Rialto
New gates in Rialto need to be built for the soil and the sun. We match the gate to the existing post spacing, which matters on older properties where nothing is standard. For homes with stucco-and-tile ranch exteriors, we match the decorative style closely enough that the new gate reads as original to the house. Installation is scheduled work with a free measure and a written quote before any commitment. Details, materials, and what a full installation includes are on the Gate Installation in Rialto page.
Electric Gate Repair in Rialto
Most electric gate failures in Rialto are dust, heat, or power related. A control board cooked by afternoon sun, a limit switch jammed with wind-blown grit, a sensor that no longer sees the edge of the gate. We are factory-trained on FAAC, BFT, Linear, and Viking operators, which covers most of the equipment on Rialto properties. Repairs are diagnosed same-day when parts are on hand, and the diagnostic is always quoted before the repair begins. See Electric Gate Repair in Rialto for the full scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Rialto
We work on the brands Rialto homes and commercial yards actually have installed: FAAC, BFT, Linear, and Viking electric operators, plus the mechanical hardware sitting under older iron gates. We keep common boards, arms, and sensors in stock locally, which shortens turnaround on most repairs. The full list lives on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rialto, CA
| Service | Typical range in Rialto |
|---|---|
| Chain-link gate latch replacement | $85 – $160 |
| Wrought-iron gate hinge replacement (per hinge) | $120 – $240 |
| Ornamental gate push-bar latch | $140 – $250 |
| Gate post straightening and setting | $220 – $400 |
| Standard swing-gate motor repair (parts + labor) | $260 – $480 |
| Control board replacement | $350 – $700 |
| Driveway gate opener installation (swing, standard) | $1,500 – $3,500 |
| Full custom gate installation (fabrication, hanging, hardware) | $2,500 – $8,000+ |
Prices in Rialto run slightly higher than average on older properties where non-standard post spacing requires custom hinge or bracket work. Dirt and sun damage also push some repairs up: a seized rolling mechanism that needs a full teardown costs more than a simple latch swap. Whatever the job, you will see the written price before any work begins, and that price does not change unless you approve the change first.
Neighborhoods We Serve in Rialto
We cover all of Rialto, from the established ranch-style neighborhoods north of the 210 down to newer developments near the I-10 corridor, plus the commercial and warehouse districts around the freeways where heavy automatic gates see heavy daily use.
- Las Colinas
- North Rialto (north of the 210)
- Renaissance
- West Rialto, near the Fontana line
- Warehouse/industrial district along the I-10 and 210 corridors
For repair calls, we can typically reach most Rialto neighborhoods within a few hours, and we take emergency gate-down calls the same day. Scheduling for installations and new operator systems follows a measure-and-quote step first.
Service Area – Cities Near Rialto
We also serve Rialto-adjacent cities through our local crews. If you are in a neighboring community, you can find details for San Bernardino, CA, Fontana, CA, Colton, CA, and Riverside, CA. Each local page has its own pricing, neighborhoods, and service details matched to that specific city.
Serving Rialto, CA - Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rialto
Most repair calls in Rialto can be reached within a few hours on the same day you call, especially for gates that are stuck open, stuck shut, or blocking a driveway. Emergency calls are answered live around the clock at (341) 895-4331, and we will tell you a real arrival window rather than a promise that sounds good on the phone.
Most direct gate replacements and hardware repairs do not require a city permit in Rialto, provided the posts stay where they are and the footprint does not change. When a new gate includes new footings, a longer setback, or an electrical run for an operator, permit requirements can apply, and we will tell you on the measure visit what the job actually needs.
Yes. We service automatic cantilever and vertical pivot gates at commercial and warehouse properties throughout Rialto’s industrial district. Those gates see constant truck traffic and fail more often from limit-switch wear, sensor misalignment, and debris in the track; we stock the common FAAC, BFT, Linear, and Viking parts on the truck to keep downtime short.
If your gate is sagging, stuck, or no longer answering the remote, call (341) 895-4331 for a free estimate. A live person answers, and the price is always in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rialto Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"Nice work on a sagging gate and a new hinge. The part took a few days so it was two trips, but they explained it and were tidy and polite each time."
- Marco Tillman