Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
Gate repair in Corona means working on two very different kinds of properties: custom ornamental gates on equestrian-zoned acreage in the western foothills, and automated iron gates in the newer HOA tracts to the east. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus only on gates: repair, installation, and electric openers. If your gate won’t close, sags on its hinges, or groans when the opener runs, call (341) 895-4331 and a live person answers, day or night.
Why Corona Homes Are Different
Western Corona still holds large ranch-style properties built between the 1960s and 1980s, many on half-acre to multi-acre lots with long gravel or paved driveways and heavy custom swing gates. These gates were often built to contain horses, so the steel is thicker, the posts deeper, and the panels heavier than anything you’d find in a standard subdivision. When an opener sized for a light pedestrian gate gets asked to move a 400-pound equestrian gate, it fails early: stripped gears, burned motors, hinges pulling out of posts. That specific failure pattern shows up constantly in the Sycamore Creek and Eagle Glen foothills and almost never in the 1990s tract communities south of the 91.
The other half of Corona is newer: planned communities from the 1990s through 2010s where gates are standard iron or steel, mostly automated, and governed by HOAs with specific rules about style, color, and even repair timelines. Hot, dry summers and Santa Ana wind events make metal expand and contract, which shifts latch alignment and confuses photo-eye sensors. Fine grit from the hills works its way into hinge grease and opener gears, accelerating wear. A gate that closes perfectly in April is often half an inch off by September. That’s not a mystery; it’s the climate doing what it does, and it tells us exactly where to look.
Styles & brands we work with
Our Main Corona Services
The two calls we take most often from Corona homeowners are about gates that won’t close properly and openers that have stopped responding. Here’s what each involves in this city.
Gate Repair in Corona
Sagging hinges, a latch that no longer catches, a post that’s shifted in dry soil. On Corona’s older equestrian lots, we frequently see gates where the original post footing wasn’t poured deep enough for the weight it carries, so the whole assembly leans over time. On newer tract homes, the usual culprits are misaligned bolts and strike plates worn loose by daily use. We diagnose on site, give you a written price before touching anything, and most repairs are done same visit. Gate Repair in Corona has a fuller breakdown of what we fix and what it costs.
Gate Installation in Corona
A new gate in Corona has to match the street. In the western foothills, that often means a custom ornamental steel gate built to contain horses and survive direct sun for decades. In an HOA community, it means selecting a design the board will approve and meeting their timeline. We measure, quote a written price, then build and hang the gate with proper footings for the soil on your lot. We don’t rush installation on this kind of work; free measure, clear price, then a scheduled install date. Gate Installation in Corona covers the process and range for materials and labor.
Electric Gate Repair in Corona
An opener that hums but doesn’t move, a gate that reverses halfway, a keypad that stopped responding. On Corona’s heavier horse-property gates, openers fail because they were never rated for the load. On tract-home gates, the issue is usually sensor misalignment from heat expansion or grit inside the gearbox. We’re factory-trained on FAAC, BFT, Linear, and Viking, among others, so the diagnosis is usually quick and the fix is made with the right part the first time. Electric Gate Repair in Corona explains what we check and typical repair costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Corona
We work on FAAC, BFT, Linear, and Viking openers most days in Corona, along with several other major brands. Our vans carry common parts for these systems, so a failed capacitor or limit switch usually doesn’t mean a second visit. Our brands page shows the full list of equipment we’re trained on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Gate latch replacement | $120 – $260 |
| Hinge repair or replacement (set of 2) | $180 – $400 |
| Sagging gate realignment | $150 – $350 |
| Post reset or replacement (single) | $300 – $700 |
| Opener motor replacement | $450 – $950 |
| Circuit board replacement | $250 – $600 |
| Photo-eye sensor replacement | $120 – $280 |
| Keypad replacement | $140 – $320 |
| Full gate installation (standard iron/steel) | $1,800 – $5,500 |
| Heavy custom gate installation | $4,000 – $12,000+ |
What pushes a Corona job toward the upper end of these ranges: a heavier equestrian gate, old post footings that need repouring, or HOA requirements that dictate a specific material or finish. Every price is written down and agreed before any work starts; the number on that sheet is the number you pay.
Neighborhoods We Serve in Corona
We work across the whole city, from the equestrian lanes off Ontario Avenue to the newer developments along the 15. Most Corona neighborhoods are within a short drive of our Inland Empire dispatch, and we schedule around school pickups, nap times, and HOA quiet hours when asked.
- Sycamore Creek
- Eagle Glen
- The Retreat
- Dos Lagos
- Horsethief Canyon Ranch
Service Area – Cities Near Corona
While this page focuses on Corona, our crews also serve several nearby communities in the Inland Empire. If you’re just outside the city line, you’re likely still in our area: Chino, CA, Chino Hills, CA, Ontario, CA, and Riverside, CA are all covered.
Serving Corona, CA - Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
Most Corona addresses can be reached the same day you call, with many repairs completed on the first visit. Call (341) 895-4331 for today’s scheduling. A live person answers around the clock, and there’s no charge for the estimate.
In Corona’s HOA-governed communities, yes, sometimes. Many boards require approval only for a full replacement or a visible change. A like-for-like repair almost never needs it. We can help you check your community’s specific rules before we start.
Yes. We work on heavy custom swing gates in the western foothills and standard automated gates in the eastern planned communities. The diagnosis and parts differ, but the approach is the same: written price first, work done right, and a cleanup photo before we leave.
Call (341) 895-4331 for a free estimate on any gate repair, installation, or opener problem in Corona. A live person answers, and you’ll have a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corona Customers Say
"Electric gate was sticking. He oiled and adjusted the track, wiped everything down after, and left no grease anywhere. Quiet, kind, and quick."
- Carlene Fuchs"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow