Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Redlands
Gate repair in Redlands usually falls into two camps: the gate itself is bent, rusted, or sagging, or the operator that moves it has stopped listening. Most jobs we see in Redlands run between $180 and $1,400 depending on whether we’re welding a hinge back into place or replacing an obsolete control board. We answer the phone live around the clock, and we schedule Redlands work without making you sit through a four-hour arrival window. Call us at (341) 895-4331 and we’ll give you a written price before anything gets touched.
Redlands is different from the flat, newer subdivisions around it. The South Historic District alone has hundreds of gates hung before 1930, many of them original ornamental iron that no modern catalog can replace. North Redlands and the east side have mid-century ranch homes where the gate opener went in during the Reagan administration and has been limping along ever since. We know both types because we see both every week. Our Gate Repair team works on everything from a sticky latch on a garden gate to a full automatic slide gate that stopped mid-track.
We’re part of the Cedarwell family of independent gate specialists, coordinated from the Inland Empire office and serving Redlands locally. That means the person who answers your call knows this area’s housing stock, not just a generic script.
Why Latch and Post Gate Repair Riverside Is Redlands’s Preferred Gate Repair Company
Redlands homeowners call us because we say exactly what a repair will cost before we start, and we write it down. That matters when you’re deciding whether to save a 1925 iron gate or replace the whole assembly. Our technicians are background-checked, uniformed, and factory-trained on the brands families actually have in Redlands: Ghost Controls, DoorKing, Elite, and Mighty Mule among them. For urgent issues, see our Electric Gate Repair in Redlands. We stock common parts locally so we’re not waiting on a shipment every time a control board fails.
The job routine is the same on every Redlands visit: shoe covers before we step inside, drop cloths under any work area, and a photo of the clean-up before we leave. That’s the Cedarwell Care Promise, and it’s included, not an upsell. Cody Beckman, who leads our team, set that standard because gate repair often means walking through a finished hallway to reach the garage-side control panel. Your floors shouldn’t pay for our work boots.
Every repair and installation carries the 365-Day Done Right Promise. If something isn’t right within a year, we make it right. No fine print, no argument. That’s the kind of warranty Redlands homeowners ask about most, especially on older gates where the first fix might reveal a second problem.
Styles & brands we work with
Sliding Gate Repair in Redlands
Sliding gate repair in Redlands often starts with a call about a gate that stalls halfway open or makes a grinding noise every morning. Most slide gates in this city run on a steel track laid across the driveway, and Redlands’ clay soil doesn’t always stay put under it. After a wet winter, the ground settles, the track shifts a quarter inch, and suddenly the gate binds. The rack and pinion drive takes the abuse and strips itself over time. Remedying that usually means resetting the track on compacted base and replacing the rack or gear set, which in Redlands typically runs $380 to $850 depending on gate length and damage.
Santa Ana winds add a second failure mode we see constantly. A solid wood or metal slide gate acts like a sail, and older installations didn’t always include wind bracing. The lag bolts loosen, the chain or rack flexes, and eventually something snaps. We add wind bracing and check every mounting point, not just the one that failed.
Track Realignment and Post Footing
When a sliding gate drags on one end, the track has usually sunk or the post has leaned. We level the track, pack the base properly, and verify the post hasn’t rotted below grade. Older Redlands gates often sit on posts set directly in soil without concrete piers, and that’s the root cause of repeat binding.
Wind-Damaged Rack and Chain Replacement
A stripped rack gear can’t be patched. We replace it with matched parts and re-tension the chain. For gates hit hard by Santa Ana gusts, we recommend adding internal wind bracing so the same repair doesn’t come due every October.
Wrought Iron Gate Repair in Redlands
Wrought iron gate repair in Redlands is the work that separates a careful shop from a shortcut shop. In the South Historic District, many driveway and garden gates are original to homes built between 1900 and 1930, and the city’s historic preservation standards expect those gates to stay period-correct. That means we weld cracked hinges in place rather than swapping in new galvanized hardware, and we source replacement hinges and handles from local architectural salvage yards when the original is beyond saving. Typical wrought iron repair in Redlands runs $300 to $900, with more involved fabrication work on the higher end.
Rust is the other constant. Redlands’ dry summers slow it, but winter rain and morning dew settle into every joint. We grind back surface rust, treat the metal, and match a paint or patina finish that doesn’t make the repair obvious. On ornamental gates with scrollwork, we TIG weld the thin sections to avoid blowing through the material.
In-Place Welding and Structural Repair
On a Craftsman near Olive Avenue recently, our techs reset a sagging wrought-iron swing gate by replacing the rotted hinge post footing and welding a cracked hinge post, reusing the original ornate hinges sourced from a local salvage yard to keep the gate period-correct. We also added a safety photocell to the existing DoorKing operator to bring entrapment protection up to current UL 325 standards without disturbing the gate’s patina. That’s the balance we aim for: safe by today’s code, honest to the home’s original design.
Rust Treatment and Refinishing
A gate that looks finished can be hiding deep pitting where the pickets meet the rail. We treat the corrosion, then use a rust-inhibiting primer and a finish matched to the surrounding metal. If the gate is painted, we blend. If it’s left as natural iron, we protect without changing the aged color the homeowner wants to keep.
Trusted Brands We Service in Redlands
Redlands gates run on a mix of old and new equipment. We service and repair Ghost Controls openers on newer installs, DoorKing operators on many mid-century and commercial gates, Elite systems on heavier slide gates, and Mighty Mule units on lighter residential setups. We also retrofit obsolete boards on older LiftMaster and FAAC operators where a direct replacement board is no longer manufactured. Parts are stocked nearby, so most Redlands repairs happen in one visit, not three.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Redlands Homes
- Clay soil shifting posts. Wet winters expand Redlands’ clay soils, and gates set without concrete piers shift with them. A swing gate that scraped the ground in March was almost certainly fine in September, and the fix is resetting the post, not just adjusting the hinges.
- Santa Ana wind loosening hardware. Dry fall winds stress every fastener on a gate. Lag bolts back out, drop rods rattle, and slide gates with old rack drives strip gears. We check the entire frame when we’re called for one loose part, because the next failure is usually already started.
- Obsolete control boards. A 1990s LiftMaster or FAAC board that dies after a power surge can’t always be replaced with the same part. We retrofit a compatible board or recommend a full operator swap when the old unit doesn’t meet current UL 325 entrapment standards.
- Rusted hinges on original iron gates. South Redlands has hundreds of iron gates where the hinge has been doing its job for eighty or ninety years and has finally cracked. We weld them in place with correct heat control so the old metal holds without the homeowner losing the original hardware.
Pricing for Gate Repair in Redlands, CA
Gate repair pricing in Redlands breaks down like this: a basic latch or hinge replacement runs $180 to $320. A sliding gate track reset with new rack or chain runs $380 to $850. Wrought iron welding and rust repair runs $300 to $900 depending on the size of the cracked section. A full operator retrofit or replacement runs $700 to $1,400, which includes safety edge sensors and photocells brought to current code. Every one of those numbers is written down and agreed to before we start. There’s no hourly mystery billing and no surprise line items. Call (341) 895-4331 for a free estimate, and we’ll quote the job from photos or a site visit.
We Also Serve Cities Near Redlands
Our crews serve Redlands plus nearby Colton, Highland, Yucaipa, and San Bernardino. If you’re in a neighboring city and need Gate Repair in Redlands pricing or scheduling, the same written-quote rule applies everywhere we go.
Serving Redlands, CA - Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Redlands
Yes. We weld cracked vintage hinges in place whenever the metal is sound enough to hold, and we source period-correct replacements from local architectural salvage yards in Redlands when the original is beyond saving. The goal is keeping the gate’s character intact, not making it look new. Call (341) 895-4331 and we’ll assess the hinge before recommending anything.
Because the wind is pushing against the gate face, and an older rack and pinion drive without wind bracing flexes under that load until the rack skips a tooth or the chain slackens. We add bracing and re-tension the drive so the gate tracks straight even in a strong gust. Most Redlands slide gate wind repairs run $380 to $850.
Very likely yes. Those boards have been out of production for years, and a power surge is what usually takes them out. We can sometimes install a retrofit board, but if the operator doesn’t support current UL 325 safety inputs, a full replacement is the honest answer. Expect $700 to $1,400 for a complete operator swap including safety edges. Call (341) 895-4331 and we’ll tell you which path makes sense for your gate.
Yes. The post is the problem, not the gate. We remove the gate, set a proper concrete footing with compacted base, re-hang the gate, and re-align the latch. On Redlands clay soil, this is one of the most common repairs we do, and it usually runs $300 to $600 including the new footing.
We retrofit. The gate itself is often fine, and replacing the operator with a modern DoorKing or Ghost Controls unit, plus new safety sensors, gives you a working gate without touching the original look. We have retrofitted dozens of 1960s-80s Redlands ranch gates, and the full swap including sensors typically runs $700 to $1,200. Call (341) 895-4331 for a written quote before you decide.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Riverside, serving Redlands since 2009.