Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across San Bernardino
Gate installation in San Bernardino typically runs $2,800 – $9,500 depending on the gate type, material, and whether you need a new operator, track, or underground system. Most standard driveway gate replacements take one to two days once the gate is fabricated or delivered. If you live near Del Rosa, Highland, the foothills north of the 210, or anywhere across San Bernardino, we’re the local crew that shows up with a written price in hand before a single tool comes off the truck. Call (341) 895-4331 and a live person answers, day or night.
Why Latch and Post Gate Repair Riverside Is San Bernardino’s Preferred Gate Installation Company
We’ve worked on enough San Bernardino gates to know what this city throws at them. The sun here is unrelenting from April through October, and when the Santa Anas push through the Cajon Pass in the fall, they test every weld, hinge, and operator bolt on your property. That’s why our Gate Installation team doesn’t just hang a gate and leave. We check the post footings, measure the rack and pinion alignment under load, and set the operator travel limits so the gate doesn’t bind in August heat or fight a December wind gust.
Cody Beckman has built our reputation around one habit: the crew treats your driveway like it’s our own. That means drop cloths down if we step inside, shoe covers on, and a cleanup photo before we pack up. San Bernardino homeowners tell us the same thing again and again: the gate works, and the yard looks like we were never there.
We’re part of the Cedarwell family of gate specialists, operating since 2009. Every job carries the 365-Day Done Right Promise. If the installation isn’t right, we make it right, no argument and no fine print. That’s the whole deal.
Styles & brands we work with
Automatic Gate Installation in San Bernardino
Automatic Gate Installation in San Bernardino means pairing the right operator with the right gate weight and wind load, not just bolting a motor to a post. We install slide operators, swing arm operators, and underground systems on driveway gates across the city, including the heavier ornamental iron gates you see on older properties in Del Rosa and the foothill developments above the 210. A typical automatic operator install for an existing gate runs $1,800 – $4,200, including safety photocells, edge sensors where required, and programming to your remotes.
Operator Selection for Heavy Gates
Most San Bernardino gates aren’t light. Wrought iron from the 1960s and 1970s weighs far more than newer aluminum or tubular steel. We size the operator by actually weighing the gate or calculating its steel gauge and dimensions, then recommend a unit rated above that load. It’s why you’ll see us specify a Linear or BFT slide operator on a Del Rosa custom gate rather than a residential kit that would burn out in two summers.
Underground Systems for Ornamental Entries
When a bespoke gate has no room for a visible arm operator, or you want clean sightlines across the entry, an underground operator makes sense. These installs require deeper post footings and proper drainage, which we handle as part of the job. Expect $3,500 – $7,000 for a complete underground operator installation in San Bernardino, including the pit liner, cover plate, and safety loops.
Gate Installation Services in San Bernardino
Gate Installation Services in San Bernardino cover the full range: new driveway gates, pedestrian gates, sliding and swing configurations, double gates, and security-focused perimeter gates. A new fabricated steel driveway gate, installed with posts and hardware, typically runs $2,800 – $6,500 in this market. Simple pedestrian gate installs start around $900. Every job starts with measurements at your property, then a written price that includes the gate, posts, hardware, and labor. You see the number before you approve anything.
Custom Wrought Iron and Ornamental Gates
San Bernardino has a deep stock of custom ornamental ironwork, especially in the older neighborhoods. When we install a new gate on those properties, we match the existing fence style and metal gauge so it doesn’t look like an afterthought. In Del Rosa and Highland specifically, non-standard hinge placements from the original installs mean we often fabricate hinge plates on site rather than forcing a kit meant for modern geometry.
Slide and Swing Gate Replacements
Replacing a worn gate in San Bernardino isn’t just about the panel. We inspect the post footings, the rack and pinion track, the roller trucks, and the operator mounting plate. Many gates from the 1950s through 1980s have posts corroded at ground level from irrigation runoff or decades of dry heat expansion. We cut and re-pour footings when needed, then set the new gate so it travels true and stays true.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Bernardino
Our technicians are factory-trained on the equipment San Bernardino families actually own: FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, LiftMaster, and Mighty Mule. When we install a new automatic gate in San Bernardino, we stock local parts for these brands and can pull programming, receiver, and safety sensor components same week. That means no waiting three weeks for a backordered control board. You call, we show up with the right part, and the gate runs.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in San Bernardino Homes
- Warped wrought iron panels from sun and wind. Decades of high-desert sun and repeated Santa Ana wind loads bend and twist old gate frames. A new gate installed on those old posts will sag within months unless we correct the geometry first.
- Non-standard hinges on 1960s-era gates in Del Rosa and Highland. Many original installs used hinge placements no modern kit accommodates. We fabricate and weld custom hinge plates on site so the gate swings clean instead of scraping or binding.
- Shallow post footings on foothill properties. In the developments north of the 210, some original gate posts were poured without enough depth or drainage. An underground operator on those posts will fail early unless the footing is redone, which we handle before the operator goes in.
- Rack and pinion drives binding under heat load. Hot summers expand metal gates enough to strip operator gears when the rack wasn’t set with proper clearance. We set the rack with San Bernardino’s temperature range in mind, not a generic spec.
Pricing for Gate Installation in San Bernardino, CA
Here’s honest San Bernardino pricing. A basic tubular steel driveway gate with posts and hardware starts around $2,800. Ornamental wrought iron runs $4,000 – $9,500 depending on size and detail. Automatic operator installs add $1,800 – $4,200. Underground operator systems run $3,500 – $7,000. Pedestrian gates start near $900. What drives cost here is post condition (many old San Bernardino posts need new footings), gate weight, and whether we’re matching historical ironwork rather than installing a stock panel. We give you a written price before any work starts, and that number doesn’t change unless you change the scope. Call (341) 895-4331 for a free estimate.
We Also Serve Cities Near San Bernardino
Our crews work throughout the Inland Empire. If you’re in Highland, Rialto, Colton, or Redlands, we handle Gate Installation in San Bernardino and the surrounding communities with the same written-price, cleanup-photo routine. One call covers the whole area.
Serving San Bernardino, CA - Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in San Bernardino
Loop detectors in San Bernardino fail or drift because the soil under our driveways expands and contracts with extreme temperature swings, and irrigation runoff from nearby landscaping soaks into the sawcut loop trenches. A newly installed gate may run fine for six months, then start closing on cars or refusing to open because the loop’s inductance shifted. We set loop sensitivity conservatively at install and recommend a sealed loop sealant that resists our dry-wet cycles. If your gate is acting strange, call (341) 895-4331 and we’ll recalibrate or replace the loop the same week.
Yes. That’s actually the majority of our Del Rosa installs. Many 1960s gates in that neighborhood have hinge placements set to the original builder’s hand-cut geometry, which doesn’t match any modern off-the-shelf kit. We cut off the old hinges, fabricate new side-mount or face-mount plates to match the offset, and weld everything in place. Your new gate swings true even if the post isn’t where a textbook says it should be. We installed a custom ornamental swing gate for a 1960s ranch in Del Rosa where the original hinge post had rusted through at the footing. Our crew cut and re-poured the post footing, fabricated new side-mount hinges to match the non-standard offset, and set a LiftMaster LA400 operator with safety photocells across the driveway so the heavy gate runs silently without sag correction now or in a decade.
Only if you want the operator hidden or the gate has no post space for an arm-style unit. Underground operators cost more ($3,500 – $7,000 installed) and require deeper footings with drainage, but they’re the right call for ornamental entries where a visible arm operator would ruin the look. We’ll tell you honestly if an arm operator will do the job for less. For most heavy wrought iron gates in San Bernardino, a properly sized Linear or BFT slide operator handles the load fine at $2,000 – $3,800 installed. Call us at (341) 895-4331 and we’ll measure your gate and give you both options in writing.
Santa Ana winds push a slide gate sideways as it travels, which loads the roller trucks and can knock the rack out of alignment if the gate wasn’t set with proper clearances. In San Bernardino, we install slide gates with a wind-rated track system and set the end stops so the gate can’t slam into the post under a 50 mph gust. For properties near the Cajon Pass or in exposed foothill areas, we may recommend a heavier-gauge gate panel or an additional mid-rail to resist wind flex. Most of our San Bernardino slide gate installs are built to handle what the Santa Anas actually deliver, not a coastal breeze spec.
Yes, and San Bernardino is actually one of the better cities in Southern California for solar gate openers. We get enough clear high-desert sun year-round that a correctly sized solar panel and battery bank will run a FAAC or LiftMaster operator reliably. The catch is battery storage: our winter nights get cold enough to reduce battery efficiency, so we size the battery bank for the shortest winter day, not the longest summer one. A solar operator install runs $2,200 – $4,000 depending on panel wattage and battery capacity. For gates used many times per day, we may recommend a hybrid AC line with solar backup. Call (341) 895-4331 and we’ll check your sun exposure and usage to size it right.
If your gate is sagging, jammed, or simply old enough to be a problem every other month, we’d rather install it once and forget it. Call Latch and Post Gate Repair Riverside at (341) 895-4331 for a free, no-pressure estimate. You’ll get a written price before any work begins, shoe covers and drop cloths if we step inside, and a cleanup photo before we leave.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Riverside, serving San Bernardino since 2009.